Filtered generated 736 hits.
-
2020:11 Competency based assessments of Nuclear Power Plant controlroom operators
Experiences of development and first operational methodological and technical demonstrator application...
Content type: Publications -
2020:07 Fibre Clogging in Nuclear Power Plants
SSM perspective Background Emergency core cooling systems in boiling- and pressurized water reactors use strainers. Their purpose is to out foreign material suspended in the cooling water so this material does not reach the reactor. After the 1992 event at Barsebäck nuclear power plant when the strainers of the emergency cooling system was clogged due to fibers in the cooling water, all...
Content type: Publications -
2020:05 General data in accordance with the requirements in Article 37 of the Euratom Treaty
Decommissioning of the nuclear reactors Ringhals 1 and Ringhals 2 in Sweden...
Content type: Publications -
2020:04 Recent Research on EMF and Health Risk, Fourteenth report from SSM’s Scientific Council on Electromagnetic Fields, 2019
SSM perspective Background The Swedish Radiation Safety Authority’s (SSM) Scientific Council on electromagnetic Fields monitors current research on potential health risks in relation to exposure to electromagnetic fields and provides the Authority with advice on assessing possible health risks. The Council gives guidance when the Authority must give an opinion on policy matters when...
Content type: Publications -
2020:02 Models for axial gas flow and mixing in LWR fuel rods
SSM perspective Background Fission gases inside a fuel rod plays an important role in the behaviour of the fuel, both during normal operation and during events and accidents. Fission gases are released from inside the fuel pellets to the gap between the pellet and the cladding tube and then flow to the plenum volume at the top of the fuel rod. In high burnup fuel, this axial flow to the...
Content type: Publications -
2020:01 Sulphide-induced stress corrosion cracking and hydrogen absorption incopper exposed to sulphide and chloride containing deoxygenated water at 90°C
SSM perspective Background The concept that the Swedish nuclear power industry plans to utilise for the final disposal spent nuclear fuel is called KBS-3 method, which is based on three different barriers to prevent spreading of radioactive substances: copper canisters, bentonite buffers and the surrounding Swedish bedrock. In the current KBS-3 design, the spent nuclear fuel will be placed in...
Content type: Publications -
2019:27 Effect of residual stress on ductile fracture at low primary loads – Numerical study
SSM perspective Background Present report is a continuation of earlier work reported in SSM2009:27 regarding an analysis strategy for fracture assessment of defects in ductile material and SSM2011:19 on the influence from residual stresses on crack initiation and ductile crack growth at high primary loads. The Swedish procedure for safety assessment of components with defects is documented in...
Content type: Publications -
2019:26 Analysis of trends in brain tumour incidence in Sweden
SSM perspective Background In the past few years, a discussion has been ongoing in both the research community and the media as to whether exposure to radiowaves from the use of mobile phones has an impact on the incidence of brain tumours in the general population. Ever since the introduction of mobile phones in the 1980s, their use has increased dramatically and has now spread to almost all...
Content type: Publications -
2019:24 SSM's external experts' review of SKB's analysis of long-term safety of 1BMA (SFR)
SSM perspective Background Fractures in the concrete barrier of the rock vault 1BMA in the final repository for low and intermediate level waste (SFR) have been observed. The Swedish Radiation Safety Authority (SSM) enforced Swedish Nuclear Fuel and Waste Management Company (SKB) to assess the long-term radiological consequences of 1BMA (SSM2015-2432-26) given the present state of the rock...
Content type: Publications -
2019:23 Participation in the European Committee for Standardization's workshop regarding civil structures
SSM perspective Background During the period 2014-2018, a CEN1 workshop (Phase 2 Prospective Group 3 civil works) have been carried out. The aim of the workshop is to provide a base founded on the French standard in order to be able to establish a possible future European standard for the design of civil structures at nuclear power plants. The workshop has identied which additional...
Content type: Publications