Showing 754
-
2014:38 Technical Note, Detailed assessment of radionuclide Kd-values for the geosphere-main review phase
The Swedish Radiation Safety Authority (SSM) is reviewing an application submitted by the Swedish Nuclear Fuel and Waste Management Company (SKB) in 2011 to construct and operate a deep geologic repository for spent nuclear fuel at the Forsmark site in the municipality of Östhammar, Sweden. SKB has presented details of its long-term safety assessment, SR-Site, in a main report (SKB, 2011,...
Content type: Publications -
2014:35 Technical Note, Modelling comparison of alternative biosphere models with LDF models and evaluation of selected parameter values used in the biosphere dose assessment - Main review phase
This report has been prepared as part of the SSM’s Main Review Phase of SKB’s SR-Site performance assessment of the long-term safety of the KBS-3 geological disposal facility (GDF) proposed for construction at Forsmark. The review addresses the methodology employed in the dose assessment calculations of SR-Site; specifically issues of transport, accumulation and transfers of radionuclides in...
Content type: Publications -
2014:34 Technical Note, Modelling Comparison of Simple Reference Biosphere Models with LDF Models – Main Review Phase
This Technical Note describes the development of simple reference biosphere models as a means of exploring the Landscape Dose Factor (LDF) approach adopted by SKB in the SR-Site safety assessment for the proposed final disposal of spent nuclear fuel at the Forsmark site. The models are developed and described in a systematic manner, based on international guidance reflected in the...
Content type: Publications -
2014:33 Technical Note, Reproduction of SKB’s Canister Failure Calculations - What-If and ‘Residual’ Scenario to Illustrate Barrier Functions
The Swedish Nuclear Fuel and Waste Management Company (SKB) included analysis of a range of scenarios in its SR-Site report. SKB grouped these scenarios into two categories—main and residual. The main scenario included a likely scenario (corrosion failure) and a less probable scenario (seismicity-induced shear failure). The residual scenario included two unlikely scenarios—isostatic-load and...
Content type: Publications -
2014:32 Technical Note, Assessment of the derivation and use of distribution coefficients and concentration ratios – Main Review Phase
This report presents a review of the approaches and databases which SKB have used to derive concentration ratios (CRs) and distribution coefficients (Kds) to consider if they are robustly derived and fit for purpose. Credible alternative approaches are also considered. The focus of this review are SKB reports R-10-28 and TR-10-07 which describe the available site specific data and the...
Content type: Publications -
2014:30 Modelling Approaches to C-14 in Soil-Plant Systems and in Aquatic Environments
Substantial expertise on carbon biogeochemistry already exists in the fields of plant physiology and aquatic ecology and therefore is it beneficial to draw on this to identify the important issues. A paper describing the BIOPROTA C-14 model inter-comparisons, and plans for the forward programme was published in Radiocarbon Journal. Further studies on C-14 (including modelling, model...
Content type: Publications -
2014:29 Technical Note, Independent Modelling of Radionuclide Transport, Evaluation of Colloid Transport Modelling – Main Review Phase
SKB excludes consideration of colloids originating inside the canister in its performance assessment on the basis of the filtration capability of the buffer material. In the canister failure by corrosion scenario (central corrosion case), the buffer material is assumed eroded, and the filtration argument is not entirely valid for excluding modelling in-canister colloids. In this Technical...
Content type: Publications -
2014:28 Numerical simulation of ductile crack growth in residual stress fields
The study has shown on the capability of the cell model in capturing the effects on ductile tearing from limited pre-load levels and a residual stress field. Some of the conclusions are as follows: No distinctive influence on the material fracture toughness is observed from pre-loading (work hardening), both tensile and compressive, at room temperature of 1.5 or 3 % total strain. The cell...
Content type: Publications -
2014:26 Improved reference and relative dosimetry of small radiation therapy photon beams
Data tables on detector corrections for beam output measurements are provided for a large number of detectors (small air and liquid ionization chambers, silicon diodes, TLD and alanine) manufactured by major vendors, for 6 MV photons from clinical accelerators and for two Leksell Gamma Knife® models. They have been calculated with the PENELOPE Monte Carlo system at an uncertainty of 0.1%.
Content type: Publications -
2014:27 Regulation applying to welding of pressure equipment – a comparative study
The PED was in force in November 1999 and has been mandatory in European Union Member States since May 2002. Most of the standards referred to in the PED are relatively new although some of the standards were adopted in the early 1990s. On the other hand, the ASME B&PV Code has been used for a long time now and is the result of several decades of industrial experiences. The authors present...
Content type: Publications