Publikationer

Din avgränsning ger 10 träffar.

• 2022:18 Data report – sampling of sea water and marine organisms outside Ringhals NPP

  SSM perspective Background The Radiation Safety Authority (SSM) funded the collection of marine biota over an annual cycle at the Ringhals nuclear power plant (NPP) to enable development of analytical methods for C-14. Methods for the C-14 analysis and results in the form of levels of C-14 in various marine organisms have been reported by the Swedish Defense Research Institute (FOI) in FOI...

  Innehållstyp: Publikationer

• 2022:16 Recent Research o EMF and Health Risk, Sixteenth report from SSM’s Scientific Council on Electromagnetic Fields, 2021

  SSM perspective Background The Swedish Radiation Safety Authority’s (SSM) Scientific Council on Electromagnetic Fields monitors current research on potential health risks in relation to exposure to electromagnetic fields and provides the authority with advice on assessing possible health risks. The Council gives guidance when the authority must give an opinion on policy matters when...

  Innehållstyp: Publikationer

• 2022:14 Weld residual stress and strain measurements on a mock-up with single layer strip cladding common in reactor pressure vessels

  SSM perspektiv Bakgrund Reaktortryckkärl tillverkas vanligtvis av låglegerade ferritiska stål som på insidan beläggs med ett eller flera lager av rostfritt stål, så kallad plätering eller på engelska cladding. Den rostfria pläteringen påverkar den strukturella integriteten på flera sätt, dels har pläteringen annorlunda materialegenskaper...

  Innehållstyp: Publikationer

• 2022:13 Long-time variations of radionuclides and metals in the marine environment of the Swedish west-coast studied using brown algae

  (Fucus serratus and Fucus vesiculosus)...

  Innehållstyp: Publikationer

• 2022:11 Kingdom of Sweden IRRS ARM Summary Report 2022

  The IAEA Integrated Regulatory Review Service Mission to Sweden in November 2022...

  Innehållstyp: Publikationer

• 2022:10 Internal dosimetry of radionuclides that can be released during an accident at the European Spallation Source (ESS)

  Läs mer SSM perspective Background To strengthen the material science research in Europe, the European Spallation Source (ESS) is being built in Lund in the southern part of Sweden. In the spallation process, neutrons are generated when the accelerated protons hit the tungsten target. In addition, a broad range of radioactive by-products is produced that differs from the fission products...

  Innehållstyp: Publikationer

• 2022:09 Assessment of modelling approaches for axial gas flow inside LWR fuel rods

  SSM perspective Background The fuel rod analysis program SCANAIR has been developed by IRSN (Institut de Radioprotection et de Sûreté Nucléaire) for analysis of reactivity initiated accidents (RIA) in light water reactors. The Swedish Radiation Safety Authority (SSM) has access to SCANAIR in exchange for annual contributions for its further development. The development and administration...

  Innehållstyp: Publikationer

• 2022:08 Geophysical surveys on sub marine land- and rock slides and on alpine glaciers

  SSM perspective Background The future climate evolution and the impact it might have on a repository for radioactive waste is important when assessing the long-term safety. In a project funded by SSM (Holmlund et al. 2016), bathymetric data from the Southern Quark area between Sweden and Åland, provided by the Swedish Maritime Administration, were analysed, as well as terrestrial data from...

  Innehållstyp: Publikationer

• 2022:04 Warm Pre-Stressing mechanisms

  SSM perspective Background Swedish nuclear power plants (NPP) were originally designed and analyzed with an assumed operating period of approximately 40 years. As Swedish NPPs reach their original technical design life the safety of the additional operating time has to be verified. With increased operating time, the shift in the fracture toughness curve of the reactor pressure vessel (RPV)...

  Innehållstyp: Publikationer

• 2022:03 Effect of Neutron Irradiation on the Oxidation and Corrosion of Austenitic Stainless Steels

  SSM perspective Background Reactor pressure vessel internal components of austenitic stainless steel located close to the core are subject to a high neutron flux. Irradiation by fast neutrons induces changes in the material that affect microstructure, mechanical properties and microchemistry. These changes eventually lead to an increased susceptibility to irradiation assisted stress corrosion...

  Innehållstyp: Publikationer